Is a dynamic routing protocol that developed to interconnect different Internet service providers?

Is a dynamic routing protocol that developed to interconnect different Internet service providers? Question: Which dynamic routing protocol was developed to interconnect different Internet service providers? Explanation: BGP is a protocol developed to interconnect different levels of ISPs as well as ISPs and some of their larger private clients.

Which dynamic routing protocols are developed to meet the needs of larger networks? To address the needs of larger networks, two advanced routing protocols were developed: Open Shortest Path First (OSPF) and Intermediate System-to-Intermediate System (IS-IS).

Which two examples are dynamic routing protocols choose 2? 

  • EIGRP.
  • RIP.
  • OSPF.
  • BGP.

Which protocol is used for dynamic routing? OSPF is the dynamic routing protocol used in large to very large IP networks. The protocol uses a link-state database and link-state advertisements to map the network topology. This topological map is used with the link-state algorithm to determine the best route available.

Is a dynamic routing protocol that developed to interconnect different Internet service providers? – Additional Questions

Which one is the example of dynamic routing algorithm Mcq?

RIP is a dynamic routing protocol which uses hop count as a routing metric between source and destination. It uses distance vector routing So, it is correct. RIP uses the UDP protocol for transmission of data. So, it is correct.

Is OSPF a dynamic routing protocol?

OSPF. OSPF is an open-standard dynamic routing protocol used to exchange routing information in large to very large networks.

What is the BGP protocol?

Border Gateway Protocol (BGP) refers to a gateway protocol that enables the internet to exchange routing information between autonomous systems (AS). As networks interact with each other, they need a way to communicate. This is accomplished through peering. BGP makes peering possible.

What are the 3 main components of dynamic routing protocols?

There are three main components of a dynamic routing protocol.
  • Data structure. In a dynamic routing protocol, information is structured in a table format, similar to a spreadsheet.
  • Algorithm.
  • Routing protocol messages.
  • OSPF (Open Shortest Path First)
  • RIP (Routing Information Protocol)

What is the RIP protocol?

Routing Information Protocol (RIP) is a distance vector protocol that uses hop count as its primary metric. RIP defines how routers should share information when moving traffic among an interconnected group of local area networks (LANs).

What is Igrp protocol in networking?

Interior Gateway Routing Protocol (IGRP) is a distance vector interior gateway protocol (IGP) developed by Cisco. It is used by routers to exchange routing data within an autonomous system.

What is the difference IGRP and EIGRP?

The main difference between the IGRP and EIGRP is that, Interior Gateway Routing Protocol is Classful routing technique, while Enhanced Interior Gateway Routing Protocol is a classless routing technique. 1. IGRP stands for Interior Gateway Routing Protocol. EIGRP stands for Enhanced Interior Gateway Routing Protocol.

What is RIP and IGRP?

RIP stands for Routing Information Protocol. IGRP Stands For Interior Gateway Routing protocol. 2. RIP works on Bellman Ford algorithm. IGRP also works on Bellman ford Algorithm.

Is EIGRP a dynamic routing protocol?

EIGRP is a dynamic routing protocol by which routers automatically share route information. This eases the workload on a network administrator who does not have to configure changes to the routing table manually.

What is OSPF and EIGRP?

EIGRP (Enhanced Interior Gateway Routing Protocol) and OSPF (Open Shortest Path First) are two common Interior Gateway Protocols (IGP) specifying how routers or data switches communicate with each other. They are often applied in different situations for varied performance on speed, delay, etc.

Is OSPF the best routing protocol?

While BGP excels with dynamic routing for large networks, OSPF offers more efficient path choice and convergence speed. Border Gateway Protocol, or BGP, and Open Shortest Path First, or OSPF, are two of the most popular, standards-based dynamic routing protocols used around the world.

What is RIP OSPF and BGP?

OSPF and RIP are Interior Gateway Protocols (IGP) and distribute routing information within an autonomous system, whereas BGP is a Exterior Gateway Protocol. The routes learned via the dynamic routing protocols are applied to the kernel routing table.

Why OSPF is used?

The main advantage of a link state routing protocol like OSPF is that the complete knowledge of topology allows routers to calculate routes that satisfy particular criteria. This can be useful for traffic engineering purposes, where routes can be constrained to meet particular quality of service requirements.

What is difference between RIP EIGRP and OSPF?

RIP is a distance-vector protocol; EIGRP is an enhanced distance vector protocol developed by Cisco and OSPF is a link-state routing protocol.

What is OSPF and RIP EIGRP and Igrp and EGP?

Routing Information Protocols(RIP) Interior Gateway Protocol (IGRP) Open Shortest Path First (OSPF) Exterior Gateway Protocol (EGP) Enhanced interior gateway routing protocol (EIGRP)

Which is best OSPF or EIGRP?

The network convergence time is faster than OSPF networks, because EIGRP network can learn the topology information and updates more rapidly. The performance of packet delay variation for EIGRP is better than for OSPF.


RIP, EIGRP and OSPF are all interior gateway protocols (IGP) while BGP is an exterior gateway protocol (EGP). Basically, interior protocols are meant to dynamically route data across a network that you fully control and maintain.

Leave a Reply

Your email address will not be published. Required fields are marked *